With regular usage for several years, the wooden staircases become dull and start to develop blotchy imprints. Needless to say, they are not pleasant to the eyes.
Whenever someone enters the home, the first thing that catches attention is the staircase. As the overall impression of the home partly relies on the stairs, it is imperative to maintain the stairs well.
Herefore, take out the paint jar as soon as you notice any fading woods. However, most people tend to avoid painting as it involves the tiring process of sanding.
But you can get the painting done without sanding. That too, with a substantial finish.
Thence, if you notice some marks on your staircase, don’t worry. We are here to help you throughout the procedure of painting stairs without sanding.
Let’s begin then!
Steps to Paint Stairs Without Sanding
Usually, painting the stained wooden floor demands stripping off the total surface and then covering it with coats of sand. The process of sanding ensures the longevity of the painted floor.
Still and all, if you wish to refinish the wood stairs without sanding, here is how! For more suggestions, you can read about High Heat Spray Paint.
Step 1: Clean Up the Surface
To begin with the process of painting without sanding, you will need to clean up the surface. Get rid of the carpet from the staircase.
The trick here is to get an apt wooden stair cleanser. All you need to do is spray some cleaner over the floor and wipe it off using a clean towel. An in order cleaners will take off most of the dirt from the floor.
Cleaning with accurate pressure can help you get results as good as with sanding. Make sure the surface is completely parched after the cleaning. Additionally, you can check our review on Exterior Metal Door Paint.
Step 2: A Little Scuffing
Before you complain, allow us to explain. We are going for scuffing with sandpaper, not sanding.
This step will help bring down the unevenness of the surface. In addition, scuffing allows to adhere the paint relatively well.
You will not need to go for intensive scrapping here. Just use a medium grit paper and go for gentle strokes. If done properly, you will not need to repeat the step over and over again. Besides, you can choose some Sandpaper for Glass.
Step 3: Dab and Clean Up
It might seem all the dust particles are gone by now. However, the scenario is different. Hence, you will need to dab and take off any remaining dust from scuffing.
Dry or wet- you can go for any wiping. If you are going for both, we recommend a dry cleaning followed by a wet towel. You might consider checking out the Colored Pencils for Black Paper to use here.
Step 4: Tape the Stair Sides
Before you take out the painting jar and brushes, there is a small step left to do. As the paint is liquid, it may spread in places you don’t want.
To put a hold on that, you will need to cover up all the surfaces you don’t want the paint to spill. For that, you will need painter’s tape.
We suggest using the tape on the sides and treads of the stairs. That way, it becomes easier to get rid of any paint spills.
Step 5: Color Selection and Preparation
You might have set your color preference by now. Now, it is finally time to get the paint and finishing oil out.
To get a proportionate and even color mixture, you can use a stirring stick. Avoid shaking the bottle and make sure there are no bubbles in the paint.
Now take a brush of your choice. Our pick for staircase painting will be a foam brush.
Step 6: Color Application
Here comes the fun part- painting the surface. Before opening the paint jar, place it over a piece of cloth to avoid mess.
Depending on your desired intensity, you can either let the paint dry or wipe off the excess stain with a rag. To get a darker finish, wait a while before wiping. The longer you leave the paint unwiped, the darker the paint will be.
Apply the paint in the direction of the grain. Elsewise, it can be difficult to get a satisfactory finishing.
Step 7: Let the Paint Dry
Once you are done covering the staircases with paint, check if the shade matches your requirement. If required, apply another coat. But first, let the previous layer dry completely.
With that, you are done for now. Try not to use the stairs for a minimum of a day.
Step 8: Remove the Tape from the Edges
After the paint is completely soaked by the wood, you can now go for the next step. Get on the stair and take off the tapes form the border and sides of the stair.
Be sure the stain is completely dry prior to beginning with this step. Otherwise, the tape may get stuck to the paint. If you try to get rid of the tapes now, all your work will go in vain. So wait, wait and wait!
And voila! You are done!
Skipping the sanding procedure will not hurt the painting when you follow a few tricks. Although the procedure to be taxing, nothing can bit the excitement of renovating your own house.
Consider getting the best finishing oil and you are good to go. You will not need layers of sanding to conclude the process. We hope our instructions were helpful for you to get the best painting results. Do not forget to share your experience and tricks with us.
I, Mike K. was born on August 25, 1992, in Abingdon Virginia. Our family relocated to Santa Monica, California after middle school.
I received an electrical engineering degree from U.C. San Francisco. While looking for work, he was guided by an engineering position at the company where he is working for. Besides working, David and I are started blogging about the latest developments of electrical stuff and enjoy sharing my thoughts with readers.